Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Shackeng on 10 July 2013, 17:18:04
-
How can I post a PDF file which contains a diagram that I need help with please?
-
Email it to me! ;)
-
E-mail best way, or host it somewhere.
What's it about? :)
-
See you have a photobucket account - host it on there and link to it ;)
-
Have resized it, is this OK Chris?
(https://dl.dropboxusercontent.com/u/43954633/img387.jpeg)
-
Top Part is HBV setup, next down is coolant bridge and temp sensors.
What ya wanna know? :)
-
Thanks Byron.
Neither I nor my dealer can identify the AC compressor Dowty seals, and condenser 'o' rings. If someone could point them out on the pic, I would be grateful. :y Although from what Tunnie says, this is probably the wrong diagram. :-\
-
Thanks Byron.
Neither I nor my dealer can identify the AC compressor Dowty seals, and condenser 'o' rings. If someone could point them out on the pic, I would be grateful. :y Although from what Tunnie says, this is probably the wrong diagram. :-\
Err ... wrong parts diagram ... per chance ... :-\
-
Thanks Byron.
Neither I nor my dealer can identify the AC compressor Dowty seals, and condenser 'o' rings. If someone could point them out on the pic, I would be grateful. :y Although from what Tunnie says, this is probably the wrong diagram. :-\
It ... err ... would seem so ... ???
-
Diagram is all about engine cooling, HBV, bridge, washers and pipes for that.
Nothing air-con on that diagram as far as I can see :y
-
condenser 'o' rings.
Don`t know whether you`ve fitted the condenser/drier to your TD Chris, but I left the "O" rings on it :-\
-
There are dowty washers in the diag. That seal the coolant bridge. No. 26 in the box bottom right. 22 in the drawing.
Other than that there's nothing relevant. No idea if the dowtys shown are the same for ac pump though. Might be, banjo's are a similar size.
But you need the correct part no.
Tried Andyc?
-
I bought some a while back, should have receipt.
Actually, I have EPC somewhere, hold that thought.....
-
It's not surprising then that he couldn't identify the compressor seals when its not on his diagram. I've emailed AndyC who should know what I'm after. I want the seals etc avlbl when I take it down for minimum offroad time. :y
-
condenser 'o' rings.
Don`t know whether you`ve fitted the condenser/drier to your TD Chris, but I left the "O" rings on it :-\
Not fitted yet Rob, as the AC is working OK on the TD, so I intend to leave the swap for the colder weather. I'll go and have a look for them. It's in the garage roof at the moment. :y
-
I reckon item 22?
(http://theboy.omegaowners.com/oofpics/oof_odds_and_sods/acpipes.JPG)
-
However, thanks to the reminder by Tunnie and other recent posts, I will order an HBV to carry in the boot along with my crank sensor for the 3.2. I guess I better get one for the TD as well. :y
-
I reckon item 22?
(http://theboy.omegaowners.com/oofpics/oof_odds_and_sods/acpipes.JPG)
Thanks Jaime. Are the 'o' rings on there as well? I note it only shows one #22. :-\
-
EPC says 2 x 22 are required.
O rings are different I believe, and I suspect on the condensor screen - cant check at mo...
-
Thanks Byron.
Neither I nor my dealer can identify the AC compressor Dowty seals, and condenser 'o' rings. If someone could point them out on the pic, I would be grateful. :y Although from what Tunnie says, this is probably the wrong diagram. :-\
90381758
Size 9.3 x 2.4
-
EPC says 2 x 22 are required.
O rings are different I believe, and I suspect on the condensor screen - cant check at mo...
These aren`t they :-\
(http://images.whisystems.com/smartpages/partinfo_resize/DCL/15-2722_Primary.jpg)
Only part # I can find is 15-2722 (American site) but GM should be able to cross ref.
Manufacturer: ACDELCO GM ORIGINAL EQUIPMENT
Part Number: 15-2722
Description: A/C Gasket
28mm Od X 15.5mm Id ; INCLS TWO 5/8 SEALS ; 2 Per Veh
-
Thanks very much Rob. :y :y :y
-
Thanks very much Rob. :y :y :y
Suppose I`ll have to think about using "shopkeeper" as my username ::) ::)