Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: PhilRich on 15 July 2013, 20:31:04

Title: Blanking off the EGR Valve
Post by: PhilRich on 15 July 2013, 20:31:04

Please excuse my ignorance of the subject, but when you blank off the EGR valve, do you fit the blanking plate as a 'sandwich filling' between the valve and head casting, or do you fit the blanking plate in place of the valve and fasten the valve out of the way somewhere, still plugged in electrically (if that makes sense :-\) ???

Title: Re: Blanking off the EGR Valve
Post by: alank46 on 15 July 2013, 20:58:30

The blanking plate goes in as the sandwich filling and is left connected electrically.
Alan

Title: Re: Blanking off the EGR Valve
Post by: PhilRich on 15 July 2013, 21:32:06

Thanks for that Alan, very much appreciated! :y

Title: Re: Blanking off the EGR Valve
Post by: TheBoy on 15 July 2013, 21:51:07

As said, easiest way is a sandwich plate :)

Title: Re: Blanking off the EGR Valve
Post by: PhilRich on 15 July 2013, 22:31:40

Thanks TB :y