Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Anderv26 on 27 July 2013, 02:25:35

Title: C30SE wont start..
Post by: Anderv26 on 27 July 2013, 02:25:35

Hi, i have a omega B MV6, witch i just fitted a c30se (3.0 24v) engine from a omega A 3000..
The problem is: I need either a wiring diagram for the ECU, or someone to tell me wich wires i will need to conect to make the ECU go "online"

The fuelpump is running, and the engine is cranking, the coil are conected and also working..

:))

Title: Re: C30SE wont start..
Post by: biggriffin on 27 July 2013, 08:44:26

this is the engine the omega's should have had.

Title: Re: C30SE wont start..
Post by: TheBoy on 27 July 2013, 09:38:41

Not sure if electronic versions of the Senator/Caarlton wiring diagram exist. Worth getting a Haynes book of boollacks for a Senny?

Title: Re: C30SE wont start..
Post by: Andy B on 27 July 2013, 10:53:51

Omegatoy/aka Graeme C is the man for this ....  ;)

Title: Re: C30SE wont start..
Post by: 2woody on 27 July 2013, 11:28:42

the wiring diagram complete is in the Haynes manual for Carlton/Senator

Title: Re: C30SE wont start..
Post by: Anderv26 on 27 July 2013, 12:19:57

Was hoping i did'nt have to bye the haynes, alredy have the haynes for the omega B, and most wires are even the same color, but there are 3 wires left, and i don't wont to destroy the ECU by connect something to + that should be connected to - or something.. :p