Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: tooleater on 12 August 2013, 17:45:15
-
Just a quick 1 guys, which Pads should I use + how much Vx or After market :y
-
Just a quick 1 guys, which Pads should I use + how much Vx or After market :y
Vauxhall on Trade Club :y :y :y £20ish last time I bought them
-
TC pads are the best price/performance. Tried and tested, and will take some severe abuse (road use abuse, not track abuse).
Some say they are a bit wooden, but I've never been bothered by that. They do need a little heat in them for peak effectiveness though.
OE pads, approx £80 a set, are what GM fitted in the factory. Less dusty, more bite when cold.
Pattern pads for road use, IME, are universally shite. And I've tried many ;D
-
Will I able to get em 4 that :o I might throw in a set of disc s
-
Will I able to get em 4 that :o I might throw in a set of disc s
Only use OE discs - pattern tend to warp! Vx sell set front discs + pads for around £90 on TC :y
-
Trouble is i aint Got a TC card :'(
-
Worth getting one mate ;)
-
Worth getting one mate ;)
If you have a local TC dealer. Most have lost TC now :'(
-
I did try it on in the local stealers sometime ago, said it can be done if I have the card No. :-[
-
Are you an ABS member? I have GM pads in the club shop, fronts and rears exept vented rears.
Keith B
-
Are you an ABS member? I have GM pads in the club shop, fronts and rears exept vented rears.
Keith B
I thought rear pads were the same whether solid or vented discs :-\ :-\
-
Im generally not member of anything courtesy of wife,
-
Are you an ABS member? I have GM pads in the club shop, fronts and rears exept vented rears.
Keith B
I thought rear pads were the same whether solid or vented discs :-\ :-\
Yep its only the calipers, pins and springs that are different (plus of course the discs) ;)
-
Are you an ABS member? I have GM pads in the club shop, fronts and rears exept vented rears.
Keith B
I thought rear pads were the same whether solid or vented discs :-\ :-\
Yep its only the calipers, pins and springs that are different (plus of course the discs) ;)
I didn't think about them as a kit :y
-
Are you an ABS member? I have GM pads in the club shop, fronts and rears exept vented rears.
Keith B
I thought rear pads were the same whether solid or vented discs :-\ :-\
Yep its only the calipers, pins and springs that are different (plus of course the discs) ;)
I didn't think about them as a kit :y
Nor did I - was just confirming all rear pads the same and highlighting those parts that differ ???
-
....
was just confirming all rear pads the same and highlighting those parts that differ ???
I know. :y
I was just suggesting that if the rears for vented came as a kit, then it would have a different part number to a kit for rear pads for solid discs ...... hence appearance that vented disc's pads are different from sold disc's pads :y :y :y :y
-
....
was just confirming all rear pads the same and highlighting those parts that differ ???
I know. :y
I was just suggesting that if the rears for vented came as a kit, then it would have a different part number to a kit for rear pads for solid discs ...... hence appearance that vented disc's pads are different from sold disc's pads :y :y :y :y
Sorry mate - haven't got crystal balls ;D ;D ;D ;D
-
...
- haven't got crystal balls ;D ;D ;D ;D
You should try them ....... ::) ;)