Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: omegod on 15 August 2013, 20:13:23

Title: 2.2/2.6 lambda interchangeable?
Post by: omegod on 15 August 2013, 20:13:23

Howdy,

Will any of the 4 working lambdas off my 2.6 breaker fit my 2.2 ??

Title: Re: 2.2/2.6 lambda interchangeable?
Post by: RobG on 15 August 2013, 20:17:17

Not interchangeable

Title: Re: 2.2/2.6 lambda interchangeable?
Post by: omegod on 15 August 2013, 21:29:18

FFS !!! cheers rob ::)

Title: Re: 2.2/2.6 lambda interchangeable?
Post by: albitz on 15 August 2013, 21:46:15

Are all 4 lamdas on 2.6/3.2 the same as each other apart from the length of the cables ? Im reasonably sure they are,but would like to be 100%. :)

Title: Re: 2.2/2.6 lambda interchangeable?
Post by: Broomies Mate on 15 August 2013, 21:53:11

4 pots have different lambdas to the V's.  :y

Title: Re: 2.2/2.6 lambda interchangeable?
Post by: RobG on 15 August 2013, 21:53:57

Here you go Albs :)
2.6i 24v - Y26SE Position 1; With Automatic Transmission    9195606       
2.6i 24v - Y26SE Position 1; With Manual Transmission    9199470       
2.6i 24v - Y26SE Position 2; With Manual Transmission   9199470      (>Ch.) 21059096        
3.2i 24v - Y32SE Position 1; With Automatic Transmission    9195606        
3.2i 24v - Y32SE Position 1; With Manual Transmission     9199470

Title: Re: 2.2/2.6 lambda interchangeable?
Post by: biggriffin on 16 August 2013, 07:25:28

I think thats a yes albs :)

Title: Re: 2.2/2.6 lambda interchangeable?
Post by: 05omegav6 on 16 August 2013, 10:56:56

Pretty certain mine has a mix of manual and auto ones fitted at the moment :y as long as they have the same number of wires/matching plugs cannot see it being an issue...

Four pot ones are probably calibrated for the four pots gas mixture :-\ technically, the sensors on the V6 only measure the output of three cylinders :y

Title: Re: 2.2/2.6 lambda interchangeable?
Post by: Marks DTM Calib on 16 August 2013, 12:27:40

The only difference between the auto and manual ones is the wire length.

Lambda's measure 02 levels, nothing more so no need to have a difference dependent on the cylinder qty etc.

What may be different is the 02 sensor material (there are a few types including wide band) and this will be ecu dependent.

I would go as far as saying, try one.

Title: Re: 2.2/2.6 lambda interchangeable?
Post by: zirk on 16 August 2013, 13:22:16

Quote from: Albitz on 15 August 2013, 21:46:15

Are all 4 lamdas on 2.6/3.2 the same as each other apart from the length of the cables ? Im reasonably sure they are,but would like to be 100%. :)

Earlier post here, a few weeks back seems to suggest there the same, except for the cable lengths.

http://www.omegaowners.com/forum/index.php?topic=117037.msg1481086#msg1481086