Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: supersaw on 23 August 2013, 20:43:03

Title: Problem with handbrake
Post by: supersaw on 23 August 2013, 20:43:03

Hi,
I have Omega B, 95' saloon, 2.0 16v petrol. And I need complete new handbrake kit including handbrake bads, plates etc. I found these parts from omega B 98' diesel.

Will it fit to my 95' omega ?

Title: Re: Problem with handbrake
Post by: TheBoy on 24 August 2013, 09:56:26

Yes, the rear brakes before 2001 were identical across the range (2001 onwards, the V6s had vented rear discs, so discs and calipers (and the pins and springs) varied)

Title: Re: Problem with handbrake
Post by: Agemo on 24 August 2013, 09:57:25

All handbrake parts the same throughout the range (as far as I know). BUT, it's not likely your shoes will have worn out, you may just need to strip & service your brake parts.

Title: Re: Problem with handbrake
Post by: supersaw on 24 August 2013, 10:24:05

Thanks guys 4 help and advice. I will strip out whole rear brake system.