Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bond007 on 11 September 2013, 22:35:33

Title: re cam sensor
Post by: bond007 on 11 September 2013, 22:35:33

Hi all I have an omega 2.2 CDX "02" runs like a dream,but one morning turned key and went into limp mode ... took off in third gear or something (auto), then turned key again and all's well ....don't figure!
I was told cam sensor of which I bought then a friend of mine who has been fixing my cars for years fitted it but was worse!!!!! So put old sensor back on. What's your thoughts .....

Title: Re: re cam sensor
Post by: symes on 11 September 2013, 22:41:07

gearbox ? try these mate
http://www.omegaowners.com/forum/index.php?topic=90508.0
http://www.omegaowners.com/forum/index.php?topic=90673.0
that should help you :y

Title: Re: re cam sensor
Post by: martin42 on 11 September 2013, 22:42:31

Need another 2cylinders,that's the problem  ;D

Title: Re: re cam sensor
Post by: symes on 11 September 2013, 22:44:44

mmm 2.2 handles nicer and easier to work on :y-but useless as coffee table :(

Title: Re: re cam sensor
Post by: bond007 on 11 September 2013, 22:51:42

Hi again the light on the dash is car and spanner but it does not flash. 2.2 is just fine by the way only has 66,000 on the clock... just mot no advisories!!!!

Title: Re: re cam sensor
Post by: zirk on 11 September 2013, 23:24:53

Some late DBW (2.2, 2.6, 3.2) need the codes clearing before they perform normal again, as said, some do, some dont.