Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: tooleater on 27 September 2013, 12:46:58

Title: Plenum bolts
Post by: tooleater on 27 September 2013, 12:46:58
As the Torque wrench is a next day and I puchased a 3/8 20nm to 100. before I do a practise run.
is it possible to give me a dummys guide ;D to how tight without T wrench Plenum bolts should be.
Cheers John :y
Title: Re: Plenum bolts
Post by: chrisgixer on 27 September 2013, 12:49:43
8nm

But I'd do them to 20 as the bolts are enormous for 8nm.

In other words, just do em up! ;D
Title: Re: Plenum bolts
Post by: tooleater on 27 September 2013, 12:56:36
Thanks Chris, I ll have a go after lunch :y
Title: Re: Plenum bolts
Post by: chrisgixer on 27 September 2013, 13:13:37
Thanks Chris, I ll have a go after lunch :y

Just sensibly tight :y
Title: Re: Plenum bolts
Post by: TheBoy on 27 September 2013, 13:45:15
A "nip" for plenum bolts.

Obviously, having OCD and being generally anal, I always* use a torque wrench.


* When I had one
Title: Re: Plenum bolts
Post by: tooleater on 27 September 2013, 17:42:56
All done 1st attempt 1 turn of key sounded like a sewing machine. Lost my Plenum Virginity today :-[
Title: Re: Plenum bolts
Post by: dbug on 27 September 2013, 17:51:41
All done 1st attempt 1 turn of key sounded like a sewing machine. Lost my Plenum Virginity today :-[

Trust it wasn't painful for you and that you enjoyed it  :) :) :) ;)
Title: Re: Plenum bolts
Post by: tooleater on 27 September 2013, 18:06:39
I did indeed, my torque wrench arrives tomorrow, I can see why better to be safe than sorry those plugs are long way down, had a good look at the Thermo, needs doing since day 1 of purchase, looks Daunting :-\
Title: Re: Plenum bolts
Post by: 05omegav6 on 27 September 2013, 20:25:24
Thermostat is only 13 bolts ::) though one is a bit fiddly ;D
Title: Re: Plenum bolts
Post by: The Red Baron on 27 September 2013, 20:45:15
Thermostat is only 13 bolts ::) though one is a bit fiddly ;D

just a BIT...lol
 :D