Omega Owners Forum

Chat Area => General Car Chat => Topic started by: dawidski on 04 October 2013, 03:37:53

Title: Just a project idea for the future
Post by: dawidski on 04 October 2013, 03:37:53
Is the bmw straight 6 lump 2.5td (the one fitted to omegas) similar in build as the petrol version if so would it be possible to fit an m3 or 328i engine in the omega using the diesel engine mounts?  :D This issue gives me sleepless nights. I would love to fit a 320hp motor in my omega.  :y
Title: Re: Just a project idea for the future
Post by: albitz on 04 October 2013, 06:31:36
It would be easier to fit Lotus Carlton running gear,although finding it might be the hardest part.
Title: Re: Just a project idea for the future
Post by: omega3000 on 04 October 2013, 11:28:34
Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\
Title: Re: Just a project idea for the future
Post by: henryd on 04 October 2013, 12:20:06
Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\

Vauxhall put the straight six TD lump in there so every reason to think that another straight six petrol or diesel would fit :y
Title: Re: Just a project idea for the future
Post by: tunnie on 04 October 2013, 12:21:56
Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\

As above, every 2.5 TD is a straight 6  :y

Also seen a Lotus 3.6 S6 in an Omega, which went in ok.

Think a 328i engine would be pointless, as would 3.0 straight 6, not much gain?
Title: Re: Just a project idea for the future
Post by: dawidski on 04 October 2013, 13:05:50
Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\

As above, every 2.5 TD is a straight 6  :y

Also seen a Lotus 3.6 S6 in an Omega, which went in ok.

Think a 328i engine would be pointless, as would 3.0 straight 6, not much gain?

The Lotus 3.6 is hard to find and would be expensive to run also its turbo so I'm guessing they are not cheap to replace.
M3 3.2 (e36 version) 320hp or (e46) 340hp I think is a good enough option. The 3.0 (in the e46) has about 245hp and I think with a little tune would run about 260, me thinks anyway  :(  So it does seem worth it. I know the omega v6 can get some serious power, but I'm not sure about reliability. 

Unless you guys can tell me if you can swap in like a 3 liter diesel from the 5 series ?  :P
Title: Re: Just a project idea for the future
Post by: dbug on 04 October 2013, 15:41:41
If I can squeeze a 3.8S Jag lump and gearbox into a 105E Ford Anglia, then anythings possible with engine swaps ;)  Having said that some transplants are easier than others, and other parts usually need upgrading like suspension, braking and drivetrain etc ;)
Title: Re: Just a project idea for the future
Post by: dawidski on 04 October 2013, 15:54:55
Tbh if I was doing a swap I would buy a whole car so I could get all the bits needed  :y
Title: Re: Just a project idea for the future
Post by: omega3000 on 04 October 2013, 18:48:19
Has anyone ever put a straight 6 in an omega ? Cant recall seeing one  :-\

As above, every 2.5 TD is a straight 6  :y

Also seen a Lotus 3.6 S6 in an Omega, which went in ok.

Think a 328i engine would be pointless, as would 3.0 straight 6, not much gain?


Apart from no cuts to the hands when working on a V6  ;D ;) I guess the Skyline would be a better transplant option  :y
Title: Re: Just a project idea for the future
Post by: martin42 on 04 October 2013, 19:29:39
Hasnt there been a toyota supra engine been dropped into an omega??
Title: Re: Just a project idea for the future
Post by: Keith ABS on 04 October 2013, 20:36:35
  Was one dropped into a Carlton GSI a few years back
Keith B
Title: Re: Just a project idea for the future
Post by: dbug on 04 October 2013, 23:28:54
Hasnt there been a toyota supra engine been dropped into an omega??

Yep was on OOFer from Thailand IIRC ;)