Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ianboyo on 09 October 2013, 19:32:19

Title: Camsensor
Post by: ianboyo on 09 October 2013, 19:32:19

Hi can anyone help my father has a omega 2.0 getting lots of problems with cam sensor its ok for a while then engine light comes on when I check it with "My Code Reader" calls up the camsensor I changed it last week for a genuine one it run great fir a bout 200 miles and engine has come on is there anything else that would cause this any help would be great

Title: Re: Camsensor
Post by: TheBoy on 09 October 2013, 19:58:36

Still same code now?

Title: Re: Camsensor
Post by: ianboyo on 09 October 2013, 23:06:01

Yes it's same code

Title: Re: Camsensor
Post by: Shallow Al on 10 October 2013, 00:22:24

The only cam sensors that work properly are genuine ones from a Vauxhall dealer. Expensive, but they do work reliably. Is yours from a dealer?
Mine was failing when I got the car, changed it for one from a dealer, which required changing the loom connector.
 All was good.
The code has come up since, but on that occasion the sensor was doing a good job of telling me that my cambelt tensioner was getting loose, due to my own mistake of badly fitting a new kit  :-[.
So I would check the cambelt too for any issues, if you have not done so already.
HTH. :y

Title: Re: Camsensor
Post by: ianboyo on 10 October 2013, 18:10:24

Thanks for your help bud I think his Cambelt does need changing will look into that