Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: brian36 on 28 October 2013, 13:20:30

Title: problem starting running rough
Post by: brian36 on 28 October 2013, 13:20:30

so have put previous problems on and now today car wouldn't start for about 5 mins and ran rough, took short drive stopped turned off and again problem starting.2.6 mv6 2001 y26se.
it has had new plugs, new coil packs, new crankshaft sensor all genuine parts.
still showing multi misfire and no 5 ,also knock sensor bank2 showing fault which I assume is due to misfire. anyway when car starts it shakes runs rough and excessive fuel consumption.
could this be crankshaft sensor failure again? Any help would be appreciated :y

Title: Re: problem starting running rough
Post by: dbug on 28 October 2013, 16:33:11

Possibly - I had a genuine Vx one fail very quickly on my old Elite.  Replacement was ok :y