Omega Owners Forum

Chat Area => General Car Chat => Topic started by: tooleater on 22 November 2013, 18:10:54

Title: It was worth it
Post by: tooleater on 22 November 2013, 18:10:54

V6 Thermostat change, after much F-------- + blinding got it done :o even managed to some how magically to lose the plug and its little loom for the Idle speed adjuster under Plenum >:( that engine bay ???  breath, hold and Exxxhale. Thank God I took off the Plenum again a further check with Mr Led Lenser revealed a Leaf sitting on the valves and yes I used kitchen roll at all stages. but credit to engine,only 11 of the 12 sandwich plate bolts are torqued, 1 is knackered and it still runs sweet :y

Title: Re: It was worth it
Post by: chrisgixer on 22 November 2013, 18:23:34

Is it worth it?

What is this Blasphemy! ;)

Title: Re: It was worth it
Post by: tooleater on 22 November 2013, 18:33:45

Your right I should be stoned ;)

Title: Re: It was worth it
Post by: chrisgixer on 22 November 2013, 18:34:28

Quote from: tooleater on 22 November 2013, 18:33:45

Your right I should be stoned ;)

;D

Title: Re: It was worth it
Post by: MR MISTER on 22 November 2013, 18:57:29

Quote from: tooleater on 22 November 2013, 18:33:45

Your right I should be stoned ;)

You'll be wanting some weed then. PM sent.

Title: Re: It was worth it
Post by: tooleater on 22 November 2013, 19:20:28

you d need it have encountering the B Bolt ;D

Title: Re: It was worth it
Post by: Webby the Bear on 22 November 2013, 20:04:11

Well done mate  :y