Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Bob G on 24 November 2013, 19:08:50

Title: fans
Post by: Bob G on 24 November 2013, 19:08:50

Right as I had no conclusive answer to previous post on fan noise, here is a bit more info, still think I have a blocked matrix (heater) pipes are warm top and bottom, but main fan runs all the time, had this before till James did the matrix and got a good flow through it, stopped fan problem then.  Fan now disconnected but the other fan which is on forward face of rad on r/h/s which I assume is A/C fan now kicks in all the time.  Panel controls are set for heat on both sides and running on auto.

EML now resolved by replacing the Cam shaft sensor. ;D

Title: Re: fans
Post by: RobG on 24 November 2013, 19:16:40

Quote

Panel controls are set for heat on both sides and running on auto

Quote

A/C fan now kicks in all the time.

It will with A/C on

Title: Re: fans
Post by: Bob G on 24 November 2013, 22:22:33

ah thanks Rob , actually makes sense now doh, now just this top hose to free off and that's all the jobs done.