Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: amba on 25 November 2013, 12:16:14

Title: Wanted For F/L
Post by: amba on 25 November 2013, 12:16:14
Had hoped recent replacement would work but not so as it leaks badly and pipe union is busted. :'(...therefore I need the following if anybody can help. :y

Headlight washer pump with the short section of pipe fitted that connects to non return valve ,also the rubber bung that seals the bottom of the pump into the reservoir ,along with both pipe spring clips.  :y
Title: Re: Wanted For F/L
Post by: zirk on 25 November 2013, 13:14:33
Fairly sure the Screen and Headlight Pumps are the same, as I cant remember which one I nicked from the plod Im breaking, should have most of the piping your talking about as well if it helps. 
Title: Re: Wanted For F/L
Post by: joff on 25 November 2013, 13:34:15
If Siri has not got what you want I'm 99.9% I have  :y
Title: Re: Wanted For F/L
Post by: joff on 25 November 2013, 13:36:27
If Siri has not got what you want I'm 99.9% I have  :y
That's Zirk, I-Pad don't you just love it
Title: Re: Wanted For F/L
Post by: RobG on 25 November 2013, 13:42:47
Quote
Fairly sure the Screen and Headlight Pumps are the same,
Nope
Title: Re: Wanted For F/L
Post by: zirk on 25 November 2013, 13:54:55
If Siri has not got what you want I'm 99.9% I have  :y
That's Zirk, I-Pad don't you just love it
Thanks fojj
Title: Re: Wanted For F/L
Post by: zirk on 25 November 2013, 13:58:38
Quote
Fairly sure the Screen and Headlight Pumps are the same,
Nope
Ok, thanks Rob, thought they were the same, will have to check what I nicked then, fairly sure it was the lower one, if memory serves me, lower one is screen, higher one is headlights.
Title: Re: Wanted For F/L
Post by: amba on 25 November 2013, 14:12:15
Hi Guys.

Yes it is the pump at the top of the reservoir.It has the shorter section of thick pipework going to the 1 way valve .

I need the pump with the short bit of pipe attached( as the push on sleeve with a forward/back connection is missing on mine) and also the small spring clip that secures the pipe end to the 1 way valve....also the black rubber gromitt seal for the reservoir to the base of the pump.

Hope all the above makes sense. :y

PM with price/payment details please :y
Title: Re: Wanted For F/L
Post by: zirk on 25 November 2013, 14:51:42
PM sent.

Chris.
Title: Re: Wanted For F/L
Post by: amba on 25 November 2013, 17:24:41
And replied with details back in the morning :y