Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Bob G on 27 November 2013, 21:42:24

Title: Run out of ideas on EML
Post by: Bob G on 27 November 2013, 21:42:24

The issues is EML is on but the circumstances are (to me) strange:
it only comes on once engine is warm, car run fine and can reach 70mph no issues then it does start to bang a bit
 have replaced cam shaft sensor with known good one and light stayed on
codes read 335 and 340

it all seemed to start after trying to free top heater matrix hose, BUT if I had disturbed something then would not the light be on straight away.

X reg 2.0L dual fuel

Title: Re: Run out of ideas on EML
Post by: blackviper90210 on 27 November 2013, 23:22:39

Duel fuel? If your running LPG, that might upset a sensor somewhere maybe? ???

Title: Re: Run out of ideas on EML
Post by: Bob G on 27 November 2013, 23:46:27

poss but only running petrol at the moment

Title: Re: Run out of ideas on EML
Post by: Bob G on 28 November 2013, 09:37:06

also problem only occurs with hot engine

Title: Re: Run out of ideas on EML
Post by: Bob G on 28 November 2013, 09:51:48

any ideas where I can get a genuine cam sensor (old style) to eliminate it as the cause, not to sure about the "genuine" Siemens on auction site, and my VX dealer only does the new style with a build it yourself 6 core loom to splice in.