Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: conalnugent on 28 November 2013, 14:22:39

Title: 2.5td code 49
Post by: conalnugent on 28 November 2013, 14:22:39

Got this code up the other night about glow device which is obviously about the heater plugs. The car starts perfect cold or warm with no problems what so ever. The got a remapped brain put in recently which ran perfect for a couple of days then I changed the inlet manifold and it wad feeling very down on power for a few weeks.  Then 2 days ago its seems to be running fine with SOME of the lost power regained.

Code code 49 be being caused by anything other than the heater plugs? ?

Title: Re: 2.5td code 49
Post by: TheBoy on 28 November 2013, 19:46:46

Why did you change the inlet? And what remap is it?

If 49 is the glow plug one (cant remember), then its of no concern if the car starts OK.

Title: Re: 2.5td code 49
Post by: conalnugent on 05 December 2013, 23:21:22

Was putting on a nicely painted manifold.  All vacume hoses are replaced and gaskets all good. Its a custom map a friend of a friend done. But like I said when 1st went in was perfect and really fast and transformed the car until I changed the inlet.

Pain in the arse

Title: Re: 2.5td code 49
Post by: TheBoy on 06 December 2013, 18:50:22

So revert to old fanimold and see if the problem persists...

Title: Re: 2.5td code 49
Post by: conalnugent on 08 December 2013, 21:48:31

will do. just needa get them pesky gaskets...

Title: Re: 2.5td code 49
Post by: TheBoy on 09 December 2013, 16:53:25

Should be able to reuse, I think I only changed mine once in the time I had the car, and the intake was always being taken off for one reason or other...