Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: Ralph on 10 December 2013, 23:35:28
		
			
			- 
				I can't get my glove box open !
The lever/ handle has pulled out & stayed out, there feels to be a cylindrical part that's come out with it.
I can't get the lever / handle to go back.
Any ideas how I can get it open or what's gone wrong ?
It's dark at the moment so I'll have another look in daylight, it seems to be just one thing after the other at the minute  :'(
			 
			
			- 
				There's a guide in the maintenance section about this issue, although I'm not sure if it suggests how to open the glove box on the first place  ???
It is a common enough problem so someone should have an idea  :y
			 
			
			- 
				Handle should clip back in... kind of... can then be used sort of normally :y
You do need the glovebox open to remove it though :y
			 
			
			- 
				Mine went as well recently. I can, (ahem), put my finger in the hole left by the broken handle, and push downwards, and mine comes open.
Its going to stay that way for a while until the weather warms up. :-[
hth :y
			 
			
			- 
				Try pushing the glovebox box door backwards & upwards at the same time quite firmly to take the strain off the latch and then jiggle the lock handle back into place  :y
			
 
			
			- 
				Finger through aperture and push down..as stated..easy peasy. :y
			
 
			
			- 
				Thanks all, I've got in to it  pins are  :ybroken on catch, new one required now. :y
			
 
			
			- 
				
Thanks all, I've got in to it  pins are  :ybroken on catch, new one required now. :y
Have a look here :y
http://www.omegaowners.com/forum/index.php?topic=90660.0
			 
			
			- 
				Got a complete glovebox here,but it would cost a few quid to post.
			
 
			
			- 
				bit of a pita to replace, cheap fix though