Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Vauxhalloofer on 27 January 2014, 17:39:07

Title: Removing fuel rail and inlet.
Post by: Vauxhalloofer on 27 January 2014, 17:39:07

Hi peeps, whats the procedure for removing the fuel pipes on the fuel rail also theres one black tube with a nut that leads to master cylinder.Is it ok just to pull the injectors out with rail as need to get inlet manifold off as full of oil,2.2 cdx.Thanks

Title: Re: Removing fuel rail and inlet.
Post by: Webby the Bear on 27 January 2014, 18:23:47

Pic 2 in my guide, bro ;)

http://www.omegaowners.com/forum/index.php?topic=113765.0

Title: Re: Removing fuel rail and inlet.
Post by: Webby the Bear on 27 January 2014, 18:24:19

Oops, sorry mine was for V6  :-[

Title: Re: Removing fuel rail and inlet.
Post by: TheBoy on 27 January 2014, 18:24:32

Quote from: Webby the Bear on 27 January 2014, 18:23:47

Pic 2 in my guide, bro ;)

http://www.omegaowners.com/forum/index.php?topic=113765.0

2.2 4 pot, webby ;)

Title: Re: Removing fuel rail and inlet.
Post by: Webby the Bear on 27 January 2014, 18:25:29

Yup, quick to type, slow to understand  ::)

Title: Re: Removing fuel rail and inlet.
Post by: Vauxhalloofer on 27 January 2014, 19:18:35

LOl whats that pipe thats on the left side of the inlet manifold black one .Is there a need to depressure fuel rail  :-\

Title: Re: Removing fuel rail and inlet.
Post by: symes on 27 January 2014, 20:31:10

yes-unless you want fuel spraying everywere--little valve under black plastic cover on top of rail-iirc

Title: Re: Removing fuel rail and inlet.
Post by: Vauxhalloofer on 27 January 2014, 20:36:24

Cheers, and the other pipe is it ok to disconnect that,is it some sort of vacuum pipe to master slave cylinder.

Title: Re: Removing fuel rail and inlet.
Post by: symes on 27 January 2014, 20:37:49

yes thats fine-you need 17+19mm spanners for that-ok

Title: Re: Removing fuel rail and inlet.
Post by: Vauxhalloofer on 27 January 2014, 21:04:14

Nice one, almost there its too good a motor to let it go.Is it ok to put injector rail back in or does it have seal of some type. :)

Title: Re: Removing fuel rail and inlet.
Post by: symes on 27 January 2014, 21:12:56

each injecor has a rubber O ring-with care can be refitted but tbh have known them to split -well on v6 anyway

Title: Re: Removing fuel rail and inlet.
Post by: Vauxhalloofer on 27 January 2014, 21:18:52

Thanks gotta take inlet off as quite a bit of oil in there.Also the cambelt tensioner pulleys were done a year ago do you think its ok to reuse the same cambelt tensioner,its gates so good quality.

Title: Re: Removing fuel rail and inlet.
Post by: symes on 27 January 2014, 21:30:46

honestly mate I would do belt and tensioner and waterpump as well-check on some old threads on cam belts and 2.2 you will see what I mean mate