Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: zirk on 06 February 2014, 15:05:17

Title: 2.6 3.2 ECU Question
Post by: zirk on 06 February 2014, 15:05:17

Would a 2.6 ECU work in a 3.2? (Transponder thing aside for the moment) and if yes, is the 2.6 Map the same, asking the later due to emissions etc for MOT test.

Oh, and Auto vs Manual, any issues there for the main Engine ECU or does the Auto ECU take care of that side.

Thanks Chris.

Title: Re: 2.6 3.2 ECU Question
Post by: RobG on 06 February 2014, 15:13:08

Quote from: zirk on 06 February 2014, 15:05:17

Would a 2.6 ECU work in a 3.2? (Transponder thing aside for the moment) and if yes, is the 2.6 Map the same, asking the later due to emissions etc for MOT test.

Oh, and Auto vs Manual, any issues there for the main Engine ECU or does the Auto ECU take care of that side.

Thanks Chris.

Yep
Unsure, think only difference is air/fuel metering
Nope

Title: Re: 2.6 3.2 ECU Question
Post by: zirk on 06 February 2014, 15:19:44

Quote from: RobG on 06 February 2014, 15:13:08

Quote from: zirk on 06 February 2014, 15:05:17

Would a 2.6 ECU work in a 3.2? (Transponder thing aside for the moment) and if yes, is the 2.6 Map the same, asking the later due to emissions etc for MOT test.

Oh, and Auto vs Manual, any issues there for the main Engine ECU or does the Auto ECU take care of that side.

Thanks Chris.

Yep
Unsure, think only difference is air/fuel metering
Nope

Thanks Rob,  :y

Title: Re: 2.6 3.2 ECU Question
Post by: 05omegav6 on 06 February 2014, 15:53:23

Certainly an auto ecu will work in a manual car :y

They both use the same sensors, so the ecu should be easily able to sort the fueling based on airflow :y

Title: Re: 2.6 3.2 ECU Question
Post by: TheBoy on 06 February 2014, 19:09:27

Pretty certain you configure the ecu for engince cc on that ecu.

Unable to check for def for a few days

Title: Re: 2.6 3.2 ECU Question
Post by: zirk on 07 February 2014, 15:45:16

Thanks Al and TB  :y

Title: Re: 2.6 3.2 ECU Question
Post by: Toledodude1973 on 07 February 2014, 18:02:24

Zirk when i had my ECU problems i used Albitz 3.2 ecu to try it worked but doesn't run correctly, when replacement 2.6 fitted all fine