Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: zirk on 06 February 2014, 17:52:42

Title: Ing Transponder imobiliser module Removal
Post by: zirk on 06 February 2014, 17:52:42

How do these Ing. Transponder imobiliser modules come off, last one I did was on a 3.0 and fairly sure that just pulled off the Ing outer without taking anything else apart, this one on the 3.2 doesn't what to play, is there a trick as last thing I wont to do is break it.  :'(

Title: Re: Ing Transponder imobiliser module Removal
Post by: RobG on 06 February 2014, 18:57:20

Everyone I`ve removed it`s just a sharp pull

Title: Re: Ing Transponder imobiliser module Removal
Post by: zirk on 06 February 2014, 18:59:51

Quote from: RobG on 06 February 2014, 18:57:20

Everyone I`ve removed it`s just a sharp pull

Ok thanks again Rob, must be getting weak in my old age  ::)  :y

Title: Re: Ing Transponder imobiliser module Removal
Post by: 05omegav6 on 06 February 2014, 20:54:56

As said in tother thread, the barrel holds it in place, but should pull straight off as Rob has suggested :y