Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Sir Tigger KC on 14 February 2014, 12:08:26

Title: Volume/balance knob
Post by: Sir Tigger KC on 14 February 2014, 12:08:26
As above it's not working on my stereo which is a CCR2006.

Both speakers work but the sound only comes from one or the other and occasionally both.  ::)

Also I can't adjust the volume from the knob on the unit and use the steering wheel controls.

If I fiddle with the knob I can sometimes get the balance right, but usually end up with no volume. :(

Any ideas folks?  :)
Title: Re: Volume/balance knob
Post by: 05omegav6 on 14 February 2014, 13:37:41
Loose plug on the back perchance :-\
Title: Re: Volume/balance knob
Post by: RobG on 14 February 2014, 13:51:18
Quote from: Taxi Al on 14 February 2014, 13:37:41
Loose plug on the back perchance :-\
Yep. Blob of superglue sorts it
Title: Re: Volume/balance knob
Post by: zirk on 14 February 2014, 14:14:42
Quote from: RobG on 14 February 2014, 13:51:18
Quote from: Taxi Al on 14 February 2014, 13:37:41
Loose plug on the back perchance :-\
Yep. Blob of superglue sorts it
You normally pull HU's out Rob, not stick em back in,  ::)
Title: Re: Volume/balance knob
Post by: RobG on 14 February 2014, 15:28:05
Quote from: zirk on 14 February 2014, 14:14:42
Quote from: RobG on 14 February 2014, 13:51:18
Quote from: Taxi Al on 14 February 2014, 13:37:41
Loose plug on the back perchance :-\
Yep. Blob of superglue sorts it
You normally pull HU's out Rob, not stick em back in,  ::)
Another one will be coming out tomorrow Chris ;)
Title: Re: Volume/balance knob
Post by: jonny2112 on 14 February 2014, 16:01:00
Quote from: RobG on 14 February 2014, 15:28:05
Quote from: zirk on 14 February 2014, 14:14:42
Quote from: RobG on 14 February 2014, 13:51:18
Quote from: Taxi Al on 14 February 2014, 13:37:41
Loose plug on the back perchance :-\
Yep. Blob of superglue sorts it
You normally pull HU's out Rob, not stick em back in,  ::)
Another one will be coming out tomorrow Chris ;)

 :'(
Title: Re: Volume/balance knob
Post by: Dave DND on 17 February 2014, 11:03:58
The volume switch has probably come unsoldered from the board - common fault and very easy fix

(http://www.dndservices.co.uk/smiley/icon_e_ugeek.gif)