Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: P6UL K on 04 March 2014, 18:09:20

Title: ECU Pinout Guide
Post by: P6UL K on 04 March 2014, 18:09:20

Hi,

I'm after some help with a schematic for the DTi, basically I need a wiring schematic or pin guide to be able to confirm which wires are the actuator control circuit. Then I can just run some temporary wires from the ecu direct to the actuator, to confirm whether it's a wiring or ecu fault.... As per the results I got today from the garage and the update i put in my 'No Boost' thread.

Title: Re: ECU Pinout Guide
Post by: tidla on 04 March 2014, 23:31:11

(http://i1114.photobucket.com/albums/k536/tidla1/Capture_zpsf8ea37a3.png)


not sure which component your after..
96 is boost pressure valve.


(http://i1114.photobucket.com/albums/k536/tidla1/pinout_zps2d125f5c.png)

Title: Re: ECU Pinout Guide
Post by: P6UL K on 04 March 2014, 23:40:54

Quote from: tidla on 04 March 2014, 23:31:11

(http://i1114.photobucket.com/albums/k536/tidla1/Capture_zpsf8ea37a3.png)


not sure which component your after..
96 is boost pressure valve.


(http://i1114.photobucket.com/albums/k536/tidla1/pinout_zps2d125f5c.png)

Tilda!! Thank you!!

Is there a comprehensive list for the entire pin set you could post up?

Title: Re: ECU Pinout Guide
Post by: tidla on 05 March 2014, 00:12:05

http://s1114.photobucket.com/user/tidla1/library/pin%20outs