Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Webby the Bear on 14 March 2014, 11:50:38

Title: Clutch pipe union connection urgent help needed
Post by: Webby the Bear on 14 March 2014, 11:50:38

Hi guys,

At college at the mo and need to know how to disconnect the clutch pipe union at bulk head, its a omega 2.5 manual.
cheers boys

Title: Re: Clutch pipe union connection urgent help needed
Post by: Webby the Bear on 14 March 2014, 11:57:19

in pic 4 of this thread...

http://oldsite.omegaowners.com//forum/YaBB.pl?num=1221078473

...we need to know how to disconnect the other end of that pipe thats still attrached to the gearbox. :)

Title: Re: Clutch pipe union connection urgent help needed
Post by: terry paget on 14 March 2014, 12:20:07

On my 3.2 the pipe is held in the master cylinder with a quick release connection - dig out the spring clip with small screwdriver and pull out the pipe. There is a similar inline connector at the gearbox end. The pipe into the slave cylinder screws in like a brake pipe, has coils inside bell housing, pops through a grommet and plugs into the aforementioned connector.

Title: Re: Clutch pipe union connection urgent help needed
Post by: 05omegav6 on 14 March 2014, 12:38:42

Quote from: Webby the Bear on 14 March 2014, 11:57:19

in pic 4 of this thread...

http://oldsite.omegaowners.com//forum/YaBB.pl?num=1221078473

...we need to know how to disconnect the other end of that pipe thats still attrached to the gearbox. :)

Box out first :y

Title: Re: Clutch pipe union connection urgent help needed
Post by: Webby the Bear on 14 March 2014, 16:52:33

Thanks boys.... got the bugger out in the end. It was, as said, just a pin clip thingy and then it came apart. Cheers girls  :y

Had a bit of a miggy fest today..... exhaust swap on mine. Then tranny out of their one  :)