Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: omegod on 18 March 2014, 19:17:43
-
Had some issues for a while with it holding in second eventually shifting up and occasionaly feeling it slip if it went into third, towards the end it would go into limp mode. Codes indicated 2-3 solenoid so this was swapped with a known good one as well as new fluid and filter clean which has resulted in it changing perfectly and it's much smoother all round but it still goes into limp mode occasionaly, a restart clears this. Code below is present but I am sure all the wires were reinstalled correctly.......Anyone?
P0748 Stored Pressure Control Solenoid A Electrical
-
I had same issue on my 3.2, pressure control solenoid is in the little sump and easy to get to :y