Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: terry paget on 19 March 2014, 13:14:56

Title: What is torque for wishbone pinch bolt?
Post by: terry paget on 19 March 2014, 13:14:56
Cnanging wishbones. What is the torque for the pinch bolt locating the steering ball joint pin in the steering knuckle? Is it the 100Nm lower balljoint to knuckle quoted in Haynes? Semms high to me.
Title: Re: What is torque for wishbone pinch bolt?
Post by: 05omegav6 on 19 March 2014, 13:19:18
Haynes is correct :y
Title: Re: What is torque for wishbone pinch bolt?
Post by: chrisgixer on 19 March 2014, 13:21:29
100nm

Is it, plus some angle tightening? Can't remember.

Defo 100nm involved though.


Don't forget it has to clamp the casting in the hub. Bft!