Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: terry paget on 29 March 2014, 16:34:15
-
X168JAT 2.5 petrol manual estate
Gentlemen, please forgive me, I asked this question before when changing the exhaust manifold on another 2.5 estate. Now I am changing the windscreen wiper motor assembly. This time I have a hose emerging from right lower wing, rising into a straight coupling, then ending in a right angle rubber joint. Where should it go? I think last time it was a vacuum purge hose.
-
Answering my own question, the left hand of the two central small hoses from the breather unit atop the plenum is unattached. Its hose is the same size as the connector on the end of the hose from the lower RH wing . Now all I need is a length of vacuum hose and I can join the two. Problem solved.
-
They should join via the purge valve ::)