Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Alex W on 30 April 2014, 18:42:37

Title: Rear screen lower rubber trim
Post by: Alex W on 30 April 2014, 18:42:37

Is this piece of trim supposed to be stuck on? If so, with what?

The one on my car is very loose and comes away very easily. Pressing it into the groove in the rubber window seal doesn't really hold it.

Title: Re: Rear screen lower rubber trim
Post by: davieboy0312 on 30 April 2014, 20:28:56

yea its supposed to be stuck on. usually stuck on with the adhesive the screen is held on with. if you know any windscreen fitters see if they could rebond it back on for a small fee

Title: Re: Rear screen lower rubber trim
Post by: Alex W on 03 May 2014, 22:13:00

Does anyone know what type of sealant is required here? Thanks in advance.

Title: Re: Rear screen lower rubber trim
Post by: davieboy0312 on 03 May 2014, 22:24:17

Get yourself some sikaflex mate. Sticks like shit to a blanket ;D

Title: Re: Rear screen lower rubber trim
Post by: Alex W on 04 May 2014, 15:18:59

What type of Sikaflex?

Title: Re: Rear screen lower rubber trim
Post by: zirk on 04 May 2014, 15:34:54

Ideally you need it to be stuck in so it can be removed again if necessary, I tend to use that black roofing sealent, its bonds well but doesn't actually dry rock hard.