Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: SamTan on 13 May 2014, 19:31:26

Title: Inlet manifold bolts
Post by: SamTan on 13 May 2014, 19:31:26

Hi Guys, just putting the inlet manifold back on (2.2 petrol) after having the head done due to head gasket going and noticed that the bulk head end of the manifold is thicker, this is the stud that was missing on return of the head, so I bought a new stud but not long enough, anyone know if this is a special size if so, where could I get one? Cheers guys.

Title: Re: Inlet manifold bolts
Post by: SamTan on 13 May 2014, 21:23:12

Problem now solved, I should have remembered that I took a bolt out and there was no stud! Note to self.....take notice of what I'm piggin doing! :)

Title: Re: Inlet manifold bolts
Post by: tigers_gonads on 13 May 2014, 21:41:29

Been there, done that  ;D ;D ;D