Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Crazydad on 13 May 2014, 20:15:34
-
I have been given a rear view camera in a number plate holder and was wondering whether anyone could tell me, if there is any way of fitting the cable to the reversing lights without having to drill a hole in the bodywork?
-
Feed it through the grommet that takes the numberplate light cabling
-
Thanks Rob. :y
-
so the numberplate camera has been fitted, i have run the wires up to the reversing lights, which wire do i need, to connect the camera?
-
Black/white is reverse
-
Fantastic, thanks once more ;)
-
Or like I did if you have an Estate.
Rearview camera with CID (http://www.opelomegaportal.nl/viewtopic.php?f=24&t=4134)
-
Now that is coooool! :y
If I didn't have PDC's ......
Maybe an RGB input from a dab/mp3 player hmmmm.
Now you got me thinking!!
-
Thx :)
-
Or like I did if you have an Estate.
Rearview camera with CID (http://www.opelomegaportal.nl/viewtopic.php?f=24&t=4134)
:y
-
Or like I did if you have an Estate.
Rearview camera with CID (http://www.opelomegaportal.nl/viewtopic.php?f=24&t=4134)
Excellent job, well done. :y :y :y