Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Sam Burton on 02 June 2014, 16:39:34

Title: TD Torque setting as such...
Post by: Sam Burton on 02 June 2014, 16:39:34

Hi Guys,

Can someone tell me if there is actually a torque setting as such for the new injection pipes I'm getting as I don't really want to opps them up as soon as I put them on.

The will be going from each injector to the pump

2.5td

Thanks

Title: Re: TD Torque setting as such...
Post by: martin42 on 02 June 2014, 17:19:11

Tight enough so they dont leak i would have thought,i know thats no help but just use a bit off common sense,you will know if they are not tight as they might leak  :y

Title: Re: TD Torque setting as such...
Post by: Keith ABS on 02 June 2014, 20:22:50

  Omegatoy may know, he has some experiance with 2.5TD,s
Keith B

Title: Re: TD Torque setting as such...
Post by: Agemo on 02 June 2014, 20:43:40

I just do them "tight", and as said, if they don't leak they must be tight enough.

Title: Re: TD Torque setting as such...
Post by: biggriffin on 02 June 2014, 21:30:16

As above :y

Title: Re: TD Torque setting as such...
Post by: Shackeng on 11 June 2014, 22:12:09

http://images.omegaowners.com/documents/25TD/M51D25_Engine.pdf 
It might be in here Sam :y

Title: Re: TD Torque setting as such...
Post by: Andy H on 11 June 2014, 22:21:48

Quote from: Shackeng on 11 June 2014, 22:12:09

http://images.omegaowners.com/documents/25TD/M51D25_Engine.pdf 
It might be in here Sam :y

Page 107 says 20Nm
Page 118 says 22Nm