Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Mr Skrunts on 08 July 2014, 23:39:02
-
Need some help as I can't find my audio manual .
Had a flat battery from the car being stood but can't remember exact method of putting code in.
Standard CD/Radio think its a 2006 can't remember letters (Cars a 2003 CD) T.I.A. :y
-
IIRC - its turn radio off. Ignition on, turn radio on whilst holding down AS button (keep holding till it beeps) - then code entry screen up. Enter code using 1-4 preset buttons, then press and hold AS till beeps - HTH mate :y
-
sounds good to me. many thanks
-
Code Entry as Follows:
Turn Off Stereo
Switch On Ignition (No Need To Start Engine)
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps
:y
-
Code Entry as Follows:
Turn Off Stereo
Switch On Ignition (No Need To Start Engine)
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps
:y
What happens if you don't get a beep :-\
-
Its died.. :D :D
-
Code Entry as Follows:
Turn Off Stereo
Switch On Ignition (No Need To Start Engine)
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps
:y
Thats what I said ???
-
Code Entry as Follows:
Turn Off Stereo
Switch On Ignition (No Need To Start Engine)
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps
:y
Thats what I said ???
Aye, though I think this was more thorough. Hopefully the OP can work it out from both your replies :y
The key thing is the ign needs to be on and the radio off before turning on radio - rather than letting radio come on with ign.
-
Sorted after 1st reply but thanks for all input.
Tried to find a link in the help section but didnt see on for code resetting.
Got to go through it all again on the 3.0 Elite (Need to consider selling at least 1 or the 3 omega's :'( )
-
Sorted after 1st reply but thanks for all input.
Tried to find a link in the help section but didnt see on for code resetting.
Got to go through it all again on the 3.0 Elite (Need to consider selling at least 1 or the 3 omega's :'( )
;) ;) :y