Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: joff on 13 July 2014, 20:00:24
-
Put the pins in and it will not move :( >:( removed the cable from rear to kick panel, went to remove head unit but no. :-\
-
Persevere :y
-
Swear, curse, swear etc etc
It will move eventually, just don't rip the front off!
-
Joff, if you manage it, please tell me how - mine has been stuck in for years and I've given up!
:'(
Ron.
-
Pins in, open CDC3 flap and remove cartridge. Fingers in CDC slot, lever one tool only whilst gently pulling HU same side until it "gives" by a few millimetres. Do the same to the other side. May need to alternate a few times but HU will eventually come out
-
But do NOT pull on the plastic facia, that will damage it
-
But do NOT pull on the plastic facia, that will damage it
Didn`t mention that TB as it goes without saying
-
Thanks a lot for that, Rob, but you don't know the full story!
I wish I could put photos up on here, to show you that the bugger won't come all the way out - 3/4, maybe - and won't go all the way back in. An inch or so remains sticking out.
I initially tried to get it out because the scaley-back who sold the car to me didn't include a car pass or radio code, so I was looking for the serial number, to get a code for it off ebay!
>:(
Ron.
-
Pity you weren`t nearer Ron :(
-
Yep, I know - I'm a long way away from all the helpful people!
Ron.
-
I do know I had problem getting my old one out...Kevin Wood in the end resulted in using the biggest pair of mole grips that we had at the time!! :y
-
You need one of these ;D
(http://i987.photobucket.com/albums/ae360/ianboniface/omega/547C65F2-CDD4-4569-8A41-DB5AD9F03F4E.jpg) (http://s987.photobucket.com/user/ianboniface/media/omega/547C65F2-CDD4-4569-8A41-DB5AD9F03F4E.jpg.html)
-
Pins in, open CDC3 flap and remove cartridge. Fingers in CDC slot, lever one tool only whilst gently pulling HU same side until it "gives" by a few millimetres. Do the same to the other side. May need to alternate a few times but HU will eventually come out
Thanks Rob, went out this morning and did as you said :y Head unit now out ;) just the last part of the loom to go now :y
-
Pins in, open CDC3 flap and remove cartridge. Fingers in CDC slot, lever one tool only whilst gently pulling HU same side until it "gives" by a few millimetres. Do the same to the other side. May need to alternate a few times but HU will eventually come out
Thanks Rob, went out this morning and did as you said :y Head unit now out ;) just the last part of the loom to go now :y
Easy when you know how Jon :y :y ;)