Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Amigaboy on 03 September 2014, 16:56:45

Title: code 15
Post by: Amigaboy on 03 September 2014, 16:56:45

on the diagnostic equipment my car has code 15 (ECT sensor) . I unplugged the connector and saw it has ony one pin . Went to the car parts shop , and they only offered me a dual pin ECT sensor, will it fit? The connector can plug to the two pin sensor , but only has one terminal connection.
Also , checked the resistence between the pin and the ground , it was 740 om , autodata says that at 20 celsius it should be 2600 oms.

P.S. Sorry for my bad english.