Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: mickyboy123 on 27 September 2014, 19:11:35
-
fitted a new downpipe and cat today to be honest it is quiter than my original vx 1. apart from the fact it is blowing at the manifold end slightly. has any 1 any ideas why it would do that :)
-
Was the gasket replaced :-\
-
well as you ask i did order a new 1 with exhaust but it nothing like the old 1 its was just 2 like 0 rings so i stuck with original gasket :'(
-
well as you ask i did order a new 1 with exhaust but it nothing like the old 1 its was just 2 like 0 rings so i stuck with original gasket :'(
Replace the gasket
In my experience the react cats seem to work ok on the 4 pots, the proof will be in how long they last :y
-
had a garage refit my exhaust today to stop the blowing and they also welded in a flexi joint into my original vx cat. so i have a spare nw, they also said that a couple of the actual manifold bolts were lose so they tightened them all running nice and quite again now .and all for 40 squid which i thought was excellent :y