Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: ted_one on 09 October 2014, 22:04:04

Title: Irmscher bumper foglight connectors.
Post by: ted_one on 09 October 2014, 22:04:04

Just had a call from the body shop saying that the foglight connectors on the Irmy bumper are different to the standard facelift bumper that's come of my car,and unfortunately part of the Irmy connector is missing so unusable.Question is can I just chop off the u/s connector from the Irmy bumper and then splice the facelift plug/connector in to do the job or something else :-\

Title: Re: Irmscher bumper foglight connectors.
Post by: 05omegav6 on 10 October 2014, 01:12:57

Just splice :y

Only two wires, one positive and one negative for each light, both connect to a common feed and ground...

The other two wires at the plug above the horns are for the outside temp sender :y

Title: Re: Irmscher bumper foglight connectors.
Post by: ted_one on 10 October 2014, 10:40:20

Thanks Al,I'm not picking the car up until over the weekend and so I hadn't seen the problem,so was asking the question in anticipation of having problems' as is the norm'' with the Omega. ::) :y

Title: Re: Irmscher bumper foglight connectors.
Post by: 05omegav6 on 10 October 2014, 13:27:51

At least the Irmscher bumper on the face lift gives you room to access the wiring from above easily enough :y