Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Webby the Bear on 17 October 2014, 12:21:47
-
Hi guys,
UNBELIEVABLY I have never aimed headlights :-[
Mine are very low to the ground and I think they need heightening.
As you look at the head light I can see there's an adjuster on the right (wing side) and one on the inner side. Am I right in thinking the outside one adjusts left/right and the inner adjusts up and down?
Also, what spec do I go for? Up against garage door or what? :)
Cheers guys.
-
Ok... in theory your headlights are perfect... the thing to confirm is whether your adjusters have broken (very, very common) of which alloy replacements are available. (it's also why OOFers tend not to post headlamps when breaking a car)
Apologies if this is teaching nan to suck eggs, you may have already discounted broken adjusters as the cause of a low beam.
-
Assuming it passed its MOT, then at time of test, they were in the allowed range. Omega headlights aren't the best, even with HIDs.
But worth checking for broken adjusters.
-
So how do the adjusters turn? With a Philips? And I presumably know they are broken if the headlights don't move at al?
-
Yep. Have a google and look around on here for talk of how to replace adjusters etc.. that will give you an idea of 'what the adjusters are' so to speak, easier than explaining verbally.
If you get the car parked, with wheels hard over on full lock (I think right lock is best) you'll see on the nearside wishbone, a little rod on a linkeage, which is designed to move up and down with the wishbone. This is held on with a ball and socket joint, and if anything like mine, pops out reasonably easily. You can then artificially raise the rideheight. There's another similar rod/linkeage on the rear (think) offside wishbone. Move this and watch for the headlamps moving. If there's a mild buzzing of a motor, but no movement, then you have one/both broken adjusters.
I may be giving you some bull here, as they both work to tell the headlamps what weight is in the car, so consequently they may both need to be moved in order that the lamps tilt. The other option is, of course, to get a mate to stand in the boot! Hope that's helped :y
-
Also quite the opposite - instead of with a broken adjuster the lamps don't move, rather that if the adjusters are broken then the headlamps wiggle all over the place! ;)
-
So how do the adjusters turn? With a Philips? And I presumably know they are broken if the headlights don't move at al?
Allen key. 4mm IIRC, but don't quote me.
If the adjusters aren't broke, they will be as soon as you attempt to adjust. Unless you have a big oven, and a spare pair of hands, leave well alone. That said, I'm always here to help if you do break the adjusters - Mrs TB and I are a dab hand at them now ;D. Aluminum adjusters are about £12 each, 2 required.
On level surface, drive up to a wall. Mark the kick-ups with a bit of chalk. Gently reverse back (slow enough not to move the suspension) about 5 yards, the light beam should slightly dip and go left. My MOT man gets grumpy if mine doesn't dip a bit...
-
Yep. Have a google and look around on here for talk of how to replace adjusters etc.. that will give you an idea of 'what the adjusters are' so to speak, easier than explaining verbally.
If you get the car parked, with wheels hard over on full lock (I think right lock is best) you'll see on the nearside wishbone, a little rod on a linkeage, which is designed to move up and down with the wishbone. This is held on with a ball and socket joint, and if anything like mine, pops out reasonably easily. You can then artificially raise the rideheight. There's another similar rod/linkeage on the rear (think) offside wishbone. Move this and watch for the headlamps moving. If there's a mild buzzing of a motor, but no movement, then you have one/both broken adjusters.
I may be giving you some bull here, as they both work to tell the headlamps what weight is in the car, so consequently they may both need to be moved in order that the lamps tilt. The other option is, of course, to get a mate to stand in the boot! Hope that's helped :y
Webby's is a lowly CD model. No auto adjustment.
However, even those with auto adjustment still need adjustment ;)
-
Ahhhh, one forgets some people don't have Xenons ;-) Misread it as a CDX.
In which case, yes, check for wobbly lens unit, and get adjusting. :y
-
Thanks guys,
I purchased the CD quite simply cos its the best :y
-
Is your full name Webby The Bear Faced Liar?
;)
-
Is your full name Webby The Bear Faced Liar?
;)
;D
-
Is your full name Webby The Bear Faced Liar?
;D ;D ;D ;D Wot a diamond!
-
If you do adjust the headlights Webby, remember you only get a small movement on the lights for a lot of turns of the allen key ;)
-
Hi guys, took car for mot today. Failed on headlight beam too low on N/S.
MOT chap tried to adjust but....nothing.
So, do I try it out for myself knowing that you have to turn them a billion times to get them to turn. or do I fit these new adjusters that everyones mentioned?
If you think replace the adjusters... TB may I take you up on your kind offer and pop over to you for some help? And whats the place called where I get them from (as I understand GM no longer make them :-\)
-
Ah they never made them. Well, technically, of course they made them, but they were never available to buy just the adjuster
You want this link 'ere...
http://www.omegaowners.com/forum/index.php?topic=48905.0
:y
-
Is your full name Webby The Bear Faced Liar?
;D ;D ;D ;D Wot a diamond!
:y 8) :y
-
legend cheers DBG.
So basically forget trying to muddle with adjusting what ive got.... go straight for the new adjusters?? :)
-
I've e-mailed the chap from that thread (thanks DBG).
I don't recall the name. is ''sparks and noise'' a regular on here?
-
Well I did it once (before knowing of the ally adjusters) or aralditing up an adjuste that had broken. After the time and effort fo taking it all apart we knocked (ok, ok, I dropped) the lamp. Now in hindsight, if it had the ally adjuster installed it wouldnt have mattered. But, of course, the adjuster was smashed, irreparable.
I'll be doing my lamps at some point, that's for sure :y
edit: Sorry, no, I'm not familiar with the name,, other than on that ad
-
Just ordered one aluminium adjuster off the Bay.
As I'm only doing pass. side I only need one, right?
-
Just ordered one aluminium adjuster off the Bay.
As I'm only doing pass. side I only need one, right?
You're mad.
Do both now and forget about them forever. Otherwise, the other side will break some time next week.
-
Quite. Point taken though Nick. Thanks :y
One last question... if I wanted to try the adjusters for myself... do clockwise turns on the inner adjuster higher or lower them?
:)
-
Quite. Point taken though Nick. Thanks :y
One last question... if I wanted to try the adjusters for myself... do clockwise turns on the inner adjuster higher or lower them?
:)
I don't remember, although I vaguely recall there being an arrow on the part to show you.
I do remember the adjustment being very fine; you crank away for ages to get any adjustment. A small battery screwdriver is very helpful, although it's probably not advisable on the original adjusters.
-
Quite. Point taken though Nick. Thanks :y
One last question... if I wanted to try the adjusters for myself... do clockwise turns on the inner adjuster higher or lower them?
:)
I don't remember, although I vaguely recall there being an arrow on the part to show you.
I do remember the adjustment being very fine; you crank away for ages to get any adjustment. A small battery screwdriver is very helpful, although it's probably not advisable on the original adjusters.
I have a feeling the guy tried it ''quickly '' and was just like ''theyre not moving''. So I'm thinking most likely is the adjusters are fekked so parts on order..... but if I can get it moving tomorrow then at least I can get me cert. tomorrow :y
-
Yep. Have a google and look around on here for talk of how to replace adjusters etc.. that will give you an idea of 'what the adjusters are' so to speak, easier than explaining verbally.
If you get the car parked, with wheels hard over on full lock (I think right lock is best) you'll see on the nearside wishbone, a little rod on a linkeage, which is designed to move up and down with the wishbone. This is held on with a ball and socket joint, and if anything like mine, pops out reasonably easily. You can then artificially raise the rideheight. There's another similar rod/linkeage on the rear (think) offside wishbone. Move this and watch for the headlamps moving. If there's a mild buzzing of a motor, but no movement, then you have one/both broken adjusters.
I may be giving you some bull here, as they both work to tell the headlamps what weight is in the car, so consequently they may both need to be moved in order that the lamps tilt. The other option is, of course, to get a mate to stand in the boot! Hope that's helped :y
My '99 MFL doesn't have this, but, much better IMHO, a control wheel to adjust the height. :y :y :y
Ooops Sorry, just realised I'm behind the times...........as usual. :-[ :-X :-X :-X
-
Happy to help Webby. Sadly, I lost my spare adjusters, as we could have got it done quickly without waiting for it to turn up.
-
No worries TB. Pm sent. Thanks mate :y