Omega Owners Forum

Chat Area => General Car Chat => Topic started by: chrisgixer on 24 November 2014, 10:31:26

Title: Running a cable to the rear aux socket
Post by: chrisgixer on 24 November 2014, 10:31:26

....from the pas side foot well.

Is there room to run a cable past the gear change and hand brake, under the surround whatever it's called, under (?) the vents to the socket?

Does the surround need to come out? Or can I feed it thought with a coat hanger wire or similar?

Title: Re: Running a cable to the rear aux socket
Post by: 05omegav6 on 24 November 2014, 13:57:31

Piece of piss :y only seven screws and three clips... Ring for details and ffs don't use a coathanger ::)

Title: Re: Running a cable to the rear aux socket
Post by: chrisgixer on 24 November 2014, 14:02:35

 ;D ok Al, ta ;D

Title: Re: Running a cable to the rear aux socket
Post by: YZ250 on 24 November 2014, 14:28:31

I tucked mine all the way under the plastic console lower edge where it meets the carpet and then up through the 12V accessory socket hole. Only bit I removed was the centre console armrest bit (screw each side) to gain access to the back of the aux socket plug. Took a couple of minutes.  :y