Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Sir Tigger KC on 19 December 2014, 17:31:18

Title: Fault codes following HG change
Post by: Sir Tigger KC on 19 December 2014, 17:31:18
So I took my car out for a quick 15 mile test drive this afternoon and she's running nicely!  :y 

I took it steady most of the time and didn't take it much over 4000 rpm, but when I floored it to 'nip' across a junction the EML came on.  :(

I've paperclipped it and got:

19 - Incorrect RPM signal
59 - Intake manifold Valve 1 voltage low

As said she's starting and running well so hopefully it's nothing serious, maybe check all the plugs and vac pipes?  :-\  ???

TIA!  :y
Title: Re: Fault codes following HG change
Post by: omega3000 on 19 December 2014, 17:34:26
Check the maf is connected  :D
Title: Re: Fault codes following HG change
Post by: Sir Tigger KC on 19 December 2014, 17:59:26
Cheers Emd will have a good poke about tomorrow as it's getting as cold as a witches tit out there!!  :o  ;D

I disconnected the battery and the EML light has gone out.... but thinking about it isn't 19 the Crank sensor?  ???  ::)  FFS!  :o  :(
Title: Re: Fault codes following HG change
Post by: TheBoy on 19 December 2014, 18:05:36
I'm suspicious of that 19. Shame you can't clear codes, else I'd suggest keeping a daily eye on it.
Title: Re: Fault codes following HG change
Post by: 05omegav6 on 19 December 2014, 18:06:00
Makes sense if it flashed up when you booted it... Caught it napping perhaps, though on the DBW v6, crank sensor doesn't put the eml on, so might be a red herring... :-\
Title: Re: Fault codes following HG change
Post by: joff on 19 December 2014, 18:55:17
Quote from: Taxi Al on 19 December 2014, 18:06:00
Makes sense if it flashed up when you booted it... Caught it napping perhaps, though on the DBW v6, crank sensor doesn't put the eml on, so might be a red herring... :-\

It's a 2.5 I think :-\
Title: Re: Fault codes following HG change
Post by: 05omegav6 on 19 December 2014, 19:36:56
Indeed it is ;) merely observing that I don't recall my 3.2 ever putting the eml on as a result of a Cranksensor code...
Title: Re: Fault codes following HG change
Post by: Sir Tigger KC on 19 December 2014, 19:45:55
I disconnected the battery and the light has gone out now, so I'll have a good poke about tomorrow and test further.  :y
Title: Re: Fault codes following HG change
Post by: TheBoy on 19 December 2014, 19:48:06
Quote from: Sir Tigger on 19 December 2014, 19:45:55
I disconnected the battery and the light has gone out now, so I'll have a good poke about tomorrow and test further.  :y
The light would have gone out simply by restarting :y

I bet paperclip still shows 'em though...
Title: Re: Fault codes following HG change
Post by: RobG on 19 December 2014, 19:52:50
Quote
59 - Intake manifold Valve 1 voltage low
Rear multi-ram plugged in fully?
Title: Re: Fault codes following HG change
Post by: Sir Tigger KC on 20 December 2014, 14:02:58
Quote from: RobG on 19 December 2014, 19:52:50
Quote
59 - Intake manifold Valve 1 voltage low
Rear multi-ram plugged in fully?

Spot on!!  :y  I hadn't plugged it in properly, sorted and all is well!  8)

Thanks Rob!!  :y :y :y
Title: Re: Fault codes following HG change
Post by: RobG on 20 December 2014, 14:48:18
Quote from: Sir Tigger on 20 December 2014, 14:02:58
Quote from: RobG on 19 December 2014, 19:52:50
Quote
59 - Intake manifold Valve 1 voltage low
Rear multi-ram plugged in fully?

Spot on!!  :y  I hadn't plugged it in properly, sorted and all is well!  8)

Thanks Rob!!  :y :y :y
Easy fix then ;)
Title: Re: Fault codes following HG change
Post by: Sir Tigger KC on 20 December 2014, 16:38:11
Quote from: RobG on 20 December 2014, 14:48:18
Quote from: Sir Tigger on 20 December 2014, 14:02:58
Quote from: RobG on 19 December 2014, 19:52:50
Quote
59 - Intake manifold Valve 1 voltage low
Rear multi-ram plugged in fully?

Spot on!!  :y  I hadn't plugged it in properly, sorted and all is well!  8)

Thanks Rob!!  :y :y :y
Easy fix then ;)

Yep, my heart sank yesterday when the light came on after all that work!  ;)  Thanks again!  :y :y :y
Title: Re: Fault codes following HG change
Post by: 4x4 on 20 December 2014, 16:43:32
And the price of the easy fix £1500 im sure Robg will take paypal or bank transfer  ;D
Title: Re: Fault codes following HG change
Post by: RobG on 20 December 2014, 17:41:27
Quote from: 4x4 on 20 December 2014, 16:43:32
And the price of the easy fix £1500 im sure Robg will take paypal or bank transfer  ;D
Yep ;D
Title: Re: Fault codes following HG change
Post by: Sir Tigger KC on 20 December 2014, 19:26:49
Quote from: RobG on 20 December 2014, 17:41:27
Quote from: 4x4 on 20 December 2014, 16:43:32
And the price of the easy fix £1500 im sure Robg will take paypal or bank transfer  ;D
Yep ;D

I'll bounce a cheque over to you Rob.  :y