Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: RobG on 20 December 2014, 18:04:38
-
For anyone who wants to fill up their shed ;D
INTERIOR
Pr. illuminated sun visors
Pr. beige BOSE rear shelf grilles
3 x snow button panels
4 x gear led ind. panels
2 x dashboard sun sensors (black)
5 x puddle lights
4 x tweeters
2 x int. lights with motion sensors
6 x rear reading lights
2 x glovebox lights
6 x seat heater switches (FL)
4 x running man switches (FL)
2 x TC switches (FL)
2 x boot release switches (FL)
3 x hazard switches (FL)
1 x rear acc. socket & plate (FL)
6 x rear window switches (FL)
3 x front passenger window switches (FL)
1 x indicator stalk
1 x non variable wiper stalk with MID buttons
1 x non variable wiper stalk without buttons
2 x centre vents
1 x passenger vent
1 x V6 instrument cluster (105K)
2 x rear reading lights complete with looms
Assorted blade fuses
Assorted relays incl. 2 x Servotronic
EXTERIOR
2 x temp. sensors
2 x washer level sensors
2 x Orange side indicators
2 x HID level motors
1 Pr. bonnet struts
2 x header tank caps
1 x brake cylinder caps with sensor
2 x rear numberplate lights
3 x V6 servo to plenum vac pipes
1 x vac solenoid
1 x V6 aux belt tensioner
1 x V6 oil filler neck & cap
5 x front fogs (FL)
1 x V6 N/S cable tray
2 prs. wiper arms
1 x wiper motor + linkage
1 x pr. horns
4 x offside quarterpanel light units (FL)
3 x offside boot light units (FL)
MISC
1 x screw-in tow eye
3 x handbook wallets
5 x owners handbooks
2 x audio manuals
£150 or offers for the lot. Plus postage charges
-
To go with all above:
1 set of FL saloon Star Silver body mouldings
1 set of FL saloon Reubens Red body mouldings
4 steel wheels with the obligatory unused tyres
-
Real shame the OOF courier service couldn't get these from Bristol to nearer the midlands :(
The Boy and others kindly offered to get these as near at Nottingham (where my mate lives, who came up to visit yesterday) but that first leg just never happened, and I felt if I kept asking it would be bordering on annoying!
If there's any way, I'll be definitely happy to give you pennies for the wheels, Rob. Thanks for the offer again. :)
-
I could potentially get Oxford to Nottingham just after xmas, as I need my CANdi in a hurry from MDTM, as some daft mongrel bought a Vectra-C that's broken.
-
I will be going to Scotland at some point after Christmas after I have done the son-in laws bike engine so will have to return that. how much of the job lot has to go north ? :y
-
Thank you fine fellows. :)
If memory serves, the thread managed to get all the way from Oxford to Nottingham, The Boy among the kind benefactors; it was the Bristol to Oxford bit that was the leg that struggled to find any takers. I would gladly pay full fuel cost to any OOFer, plus beer money for their trouble. Should anyone know of any of them steelies as fitted to Vectra Cs which have the clip-on alloy-wheel-effect trims, they'd also be gratefully accepted. (Insignia is out, sadly as some engineer or acLady bitsant decided to change the PCD after 30 years! >:( )
Oh, apologies to RobG for hijacking his thread! I'm still trying to buy them wheels, Rob! :y
-
I might be able to get them from Bristol to Oxford if the timing was right dependant on which job I'd just done.
-
Thank you good sir!
Right - if it's ok by all Mr VXL V6 has a potential offer of the Rog in Bristol to Oxford run, which I think then puts the wheels in shouting distance of The Boy and a couple of others, too?
Aiming for a late Jan/Feb-ish timescale, so not in need of them in the next 24hrs, or anything!
Keep me posted, VXL V6, and speak soon! :y :y
Thanks again
-
It won't be until early February, but I'm buying myself a Birthday Present in the form of a re-map for the Saab. That's going to be in Nottingham. I'm in Bristol. ;)
-
Thank you :)
I shall confer with my mate in notts, see his schedule/when im likely to see him :y