Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: serek on 13 January 2015, 20:21:24
-
as above looking for 3.2 manual Ex plod engine ecu with chip and transponder
thanks
-
Auto one works fine with a manual loom/in a manual car :y
Tech 2 should be able to switch it to a manual config :y
-
Auto one works fine with a manual loom/in a manual car :y
Tech 2 should be able to switch it to a manual config :y
Hi Al, thanks for your replay, its for my mate who live in poland and dont have access to Tech 2
-
Ah ok, in that case he might get a message on the MID to check gearbox... easily ignored ;D
-
Ah ok, in that case he might get a message on the MID to check gearbox... easily ignored ;D
Don't you earth out,a wire.and that gets rid of the message. Speak to me dtm
-
Ah ok, in that case he might get a message on the MID to check gearbox... easily ignored ;D
on 3.2 you have car with spanner on dash
-
As said, 3.2 Auto ECU will work in a Manual (MID aside if fitted) so shouldn't bring up EML or Spanner, as the ECU Loom tells the ECU whats what (or least it does on the 2.5,2.6 and 3.0).
Having said that, as pointed out by my Chip Man when he was playing about with some of mine in the past, reading some of the Police 3.2 Manual ECU were Re Mapped differently over standard 3.2 Auto ECU's. Whether it was a performance thing, a gearbox thing or a bit of both we never got that far. :-\
-
Indeed apart from the Mid message, my 3.2 was fine on an auto ecu :y
-
not say there any running issues, as I done few manual conversions and never replace ecu or wiring loom and cars was running ok
but hi asked my for parts so post in wanted section thats all :y
-
PM sent Serek.