Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: D_Mcginty on 22 January 2015, 15:17:19

Title: 2.2 DTI Starts But Then Cuts Out ( Fault Code P1220 ) Help ?
Post by: D_Mcginty on 22 January 2015, 15:17:19

Hi All.

Have an Omega B 2.2DTI (Y22DTH) 2003.

The car starts and idle for about 10 to 15 seconds. It takes rev but after that it starts to jump and jerk while idling and then cuts out.

Plugged the car Into "My Naff Code Reader" Software and Delphi Diagnostics software that I have. Both Came up with fault code :

P1220

Injection Timing
&
High/Low Flow

Can Anyone shed some light on this ? Some one said its the fuel injector pump ? But was only fitted with a second hand one this time last year ? Shouldnt have gone that quick ?

Have a picture below of "My Naff Code Reader" Pluged in and this is what comes up.

Link to Picture : https://www.dropbox.com/s/o7h8zluovmmofox/Photo%2021-01-2015%2004%2003%2026%20a.m..jpg?dl=0

Any help would be appreciated.

Title: Re: 2.2 DTI Starts But Then Cuts Out ( Fault Code P1220 ) Help ?
Post by: Webby the Bear on 22 January 2015, 18:55:40

P1220 according to the net relates to throttle position.

Have you been working in / around thus area of late?

Title: Re: 2.2 DTI Starts But Then Cuts Out ( Fault Code P1220 ) Help ?
Post by: D_Mcginty on 22 January 2015, 22:30:51

Quote from: Webby the Bear on 22 January 2015, 18:55:40

P1220 according to the net relates to throttle position.

Have you been working in / around thus area of late?

Where is the throttle position sensor actually ? Dont know where it is so I couldnt really tell you if I have or not mate.

Title: Re: 2.2 DTI Starts But Then Cuts Out ( Fault Code P1220 ) Help ?
Post by: otomega25 on 23 January 2015, 13:45:55

the sensor is up to acceleration pedal and she has blue conector with 5 wires.