Omega Owners Forum
Chat Area => General Car Chat => Topic started by: zirk on 31 January 2015, 17:35:03
-
I know a few Members are using this, so my question is this, its uses the ELM2327 BT Device so does this work on pre 2001 ODB VX Cars? and if so, does it actually work on them?
-
Only way to find out is to try it,i use torque app,basic,but reads codes,gives a description of codes and can erase them.
-
Thanks, but my question was specific to Scan my Opel App.
The Torque, is just a Generic ODB2 Post 2001 Code Reader. so unlikely to work or read pre 2000 yr cars
-
It works on my 2.2 and other DBW cars, but not on my 2.5 if that helps.
Steve
-
Works on both the 2.2 / 3.2 although their 2002
There is a way to get the app free but won't post on here probably against forum rules.
-
It works on my 2.2 and other DBW cars, but not on my 2.5 if that helps.
Steve
That matches my understanding, that it cannot communicate with pre OBDII cars.
-
It works on my 2.2 and other DBW cars, but not on my 2.5 if that helps.
Steve
That matches my understanding, that it cannot communicate with pre OBDII cars.
On a side note is there any code reader other then tech 2 that can ?
-
It works on my 2.2 and other DBW cars, but not on my 2.5 if that helps.
Steve
That matches my understanding, that it cannot communicate with pre OBDII cars.
On a side note is there any code reader other then tech 2 that can ?
See FAQ section
-
Works on both the 2.2 / 3.2 although their 2002
There is a way to get the app free but won't post on here probably against forum rules.
There is a (legitimate) free ScanMyOpel app available on the Google Play store precisely for this situation so you can try before you buy. It only reads the engine ECU though.
I used it with my facelift 2.6 before I bought the paid for app. I don't have a pre-facelift any more to test against but my assumption is that it won't do much on a pre-facelift :-\
-
Works on both the 2.2 / 3.2 although their 2002
There is a way to get the app free but won't post on here probably against forum rules.
There is a (legitimate) free ScanMyOpel app available on the Google Play store precisely for this situation so you can try before you buy. It only reads the engine ECU though.
I used it with my facelift 2.6 before I bought the paid for app. I don't have a pre-facelift any more to test against but my assumption is that it won't do much on a pre-facelift :-\
The version i was referring to was the paid for version :y
-
The version i was referring to was the paid for version :y
[/quote]
tell me!!!
pm me!
ta
-
Works on both the 2.2 / 3.2 although their 2002
There is a way to get the app free but won't post on here probably against forum rules.
There is a (legitimate) free ScanMyOpel app available on the Google Play store precisely for this situation so you can try before you buy. It only reads the engine ECU though.
I used it with my facelift 2.6 before I bought the paid for app. I don't have a pre-facelift any more to test against but my assumption is that it won't do much on a pre-facelift :-\
The version i was referring to was the paid for version :y
The paid for version costs £6 FFS. Why are we promoting pirate software? >:(