Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: TheBoy on 25 February 2015, 18:15:28
-
My lappy (Gas Syncro 6.0) won't talk to the chav, stating the controller firmware needs to be v7, which I think is an Anglo-Polish translation that Gas Syncro needs to be v7.
Only Gas Syncro available is v10, which I guess will update the ECU to v10? If so, does it keep all existing settings and maps?
Gas Syncro 6.0 will not even allow me to save the current config.
-
Does it matter? With new nozzels it will all need re mapping anyway.
...you did fit new nozzels re drilled, I take it?
-
Possibly needs older version of AC Synchro
-
I don't recall being able to save maps successfully on any version but yes, the version of Synchro needs to match the ECU or it doesn't talk, or does random things.
I'd just update the ECU, I think. I may have some old software around but as mine is a first-gen Stag 300 I might not have anything that recent.
-
Does it matter? With new nozzels it will all need re mapping anyway.
...you did fit new nozzels re drilled, I take it?
Nope, and said nozzles now scattered around West Northamptonshire :'(
-
Does it matter? With new nozzels it will all need re mapping anyway.
...you did fit new nozzels re drilled, I take it?
Nope, and said nozzles now scattered around West Northamptonshire :'(
Shiney good things in the rivers. We lost it. We... we told him to go away. And away he goes, precious! Gone, gone, gone! Sm?agol is free!