Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: swordfish on 06 March 2015, 18:00:22

Title: 2.5 elite temp
Post by: swordfish on 06 March 2015, 18:00:22

temp warning not working, were is the sender on the v6 

Title: Re: 2.5 elite temp
Post by: 05omegav6 on 06 March 2015, 18:37:19

Which temp warning? The display, the gauge or the Oh shit I've just cooked it light?

Title: Re: 2.5 elite temp
Post by: swordfish on 06 March 2015, 20:18:18

oops sorry  ;D  the gauge

Title: Re: 2.5 elite temp
Post by: 05omegav6 on 06 March 2015, 20:22:16

Sensor screws into coolant bridge,  female spade onto terminal... Has probably fallen off :y

Title: Re: 2.5 elite temp
Post by: Andy B on 06 March 2015, 21:11:15

it's right at the back ............ a bugger to even see  ;)

Title: Re: 2.5 elite temp
Post by: Andy H on 06 March 2015, 21:14:26

Easier to see if you take the whole engine out...........

(http://homepages.nildram.co.uk/~aholter/rear-v6.jpg)

Title: Re: 2.5 elite temp
Post by: 05omegav6 on 07 March 2015, 00:25:56

 ;D

Was going to suggest plenum and inlet manifold if required, but engine out is fewer bolts... :D