Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: johnnydog on 25 March 2015, 00:14:48

Title: NCDC 2013 with GID - language has changed to German!
Post by: johnnydog on 25 March 2015, 00:14:48

On my 2003 3.2 Elite estate, with a NCDC 2013 unit and GID, the language has changed to German! I have tried to change it back to English, but am struggling. I can't find any specific reference to it in the audio manual.
Does anyone know why it does it, and the procedure to change it back to English?
Thanks.

Title: Re: NCDC 2013 with GID - language has changed to German!
Post by: dbug on 25 March 2015, 01:17:14

Go to BC einstellunge  press OK systemeinstellunge OK bedientuhrung OK and you see 2nd from top HTH :y

Title: Re: NCDC 2013 with GID - language has changed to German!
Post by: Magwheels on 25 March 2015, 21:10:22

Wunderbar... ;D ;D ;D

Title: Re: NCDC 2013 with GID - language has changed to German!
Post by: Merlindriver on 26 March 2015, 15:11:44

Mine has done that a couple of time - usually if the battery is a bit low and it only just catches as it cranks over.

Title: Re: NCDC 2013 with GID - language has changed to German!
Post by: TheBoy on 26 March 2015, 17:50:09

It is possible to reprogram the display so that it defaults to English following a power interruption, but its not really worth the money IMHO.

Title: Re: NCDC 2013 with GID - language has changed to German!
Post by: johnnydog on 27 March 2015, 11:34:32

Great bit of info, thanks - now back to English!! :)

Title: Re: NCDC 2013 with GID - language has changed to German!
Post by: SP_3.2 on 01 April 2015, 16:20:55

Yep my old one did that and as said it was when the battery was on the way out 

Title: Re: NCDC 2013 with GID - language has changed to German!
Post by: johnnydog on 01 April 2015, 21:04:34

The car had been standing for a few weeks, however the battery voltage was probably low, but it started ok with no noticeable slow cranking. Worth remembering though.