Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: tigers_gonads on 01 April 2015, 15:05:02

Title: Quick question about wishbone fitting
Post by: tigers_gonads on 01 April 2015, 15:05:02

For starters, i've read the guide and understand why the front bush needs nipping up under load.
I'm banging polys in and due to this, they is nothing to twist under load so can I just torque up the bush while its up in the air ?

Title: Re: Quick question about wishbone fitting
Post by: chrisgixer on 01 April 2015, 15:37:06

Correct. As you rightly say, poly have no orientation and are not bonded to the wishbone or the centre spacer. So you can just do up the bolts to the correct torque with wheels hanging.

:y

Title: Re: Quick question about wishbone fitting
Post by: tigers_gonads on 01 April 2015, 15:43:24

Quote from: chrisgixer on 01 April 2015, 15:37:06

Correct. As you rightly say, poly have no orientation and are not bonded to the wishbone or the centre spacer. So you can just do up the bolts to the correct torque with wheels hanging.

:y

 :D :D :D

Cheers Chris  :y

Title: Re: Quick question about wishbone fitting
Post by: chrisgixer on 01 April 2015, 15:44:47

Yeah ;D we like poly we do, :y