Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: minifreek on 21 May 2015, 08:04:19

Title: Torque value...?
Post by: minifreek on 21 May 2015, 08:04:19

Hello folks, Im in need of the torque values for the head to block.

Iv looked in the maintenance section and it aint there...

I dont own a Haynes book of lies... I did have a copy of it but its disappeared....

I have everything to sort out me HG's now but dont have the torque values and what degrees the stretch bolts need to be turned to ...

Iv done the job before, a few times on different engines. Only once on my Omega when the cambelt snapped (2 weeks after i bought the ruddy car) and I replaced the heads...

Title: Re: Torque value...?
Post by: steve6367 on 21 May 2015, 08:15:23

25nm, 90deg, 90deg, 90deg, 15deg

Title: Re: Torque value...?
Post by: minifreek on 21 May 2015, 11:38:03

Thankyou  :y

I'll guess the 15deg  ::) :P

Title: Re: Torque value...?
Post by: steve6367 on 21 May 2015, 12:51:20

Quote from: minifreek on 21 May 2015, 11:38:03

Thankyou  :y

I'll guess the 15deg  ::) :P

Very good, when I did mine the last 15deg I would describe as 'bloody tight'!

Title: Re: Torque value...?
Post by: minifreek on 22 May 2015, 08:00:27

That last FT was what broke my TX55 tool last time on the last bolt LOL

Iv got about 4 to go now...

Title: Re: Torque value...?
Post by: steve6367 on 22 May 2015, 10:22:14

Your getting strong arms then!