Omega Owners Forum
Chat Area => General Car Chat => Topic started by: btc on 06 July 2015, 10:53:17
-
http://www.ebay.co.uk/itm/Vauxhall-Omega-Elite-3-2-petrol-SPARES-OR-REPAIR-/121696941196?pt=LH_DefaultDomain_3&hash=item1c55b3f48c
Don't look to bad
-
Well it is one of the best colours for the omega.
-
Same colour as mine...
-
Well actually it isn't.. Mine is a darker burgundy
-
tis the same as mine :y Reubens Red Z594
-
Looks to good to break :-\ bit to far away to be viable as a project,could do someone a turn if they are handy with the spanners :y
-
Just up the road from me, if I can be of any use to anyone...
-
“Big End Bearing on No1 cylinder worn
:o
Not heard of any bearing failure before :-\
-
“Big End Bearing on No1 cylinder worn
:o
Not heard of any bearing failure before :-\
Wonder if its just a duff lifter :-\
-
“Big End Bearing on No1 cylinder worn
:o
Not heard of any bearing failure before :-\
Wonder if its just a duff lifter :-\
Sounds like he might have done a bit of investigation , if that was nearer it would be on me drive by now ;D Bet robg will have it ::)
-
I would have had that and done it up as a hobby. Problem is it would cost me about £600 to get it here!
Are those a standard facelift option set of wheels?
-
Standard fit on the late Elites.
If the big end bearing was worn, it`ll still run :-X
-
I would have had that and done it up as a hobby. Problem is it would cost me about £600 to get it here!
Are those a standard facelift option set of wheels?
Standard later facelift Elite/MV6/Sport 17" wheels :y
-
Standard fit on the late Elites.
If the big end bearing was worn, it`ll still run :-X
It would still run if there were no piston or rod in that cylinder ;D ;D
Its a non runner for another reason..... go on someone ask him ;D ;D
-
Ok what else is wrong?? ???
-
Ok what else is wrong?? ???
Head on 1,3,5 Bank Is off. :y
-
“Big End Bearing on No1 cylinder worn
:o
Not heard of any bearing failure before :-\
Wonder if its just a duff lifter :-\
Asked why it was not running and got the reply
The top end was stripped down to establish the problem and therefore the engine wont run now. The oil was drained and white metal was plentiful. It ran beautifully prior to the big end going
Sounds like he might have done a bit of investigation , if that was nearer it would be on me drive by now ;D Bet robg will have it ::)
-
Cannot see why head was removed... :-\
-
That would be a perfect buy for me if it wasn't so far away. It would be a shame to break it. Drop in another engine in if need be, and it would be a nice car.
Apart from the distance involved , I spent my spare cash on a 1.2 Fiat Punto this morning. :-[ ;D
-
It would be a shame to break it
Singing from a different sheet now then :P :P :P ;D
-
Standard fit on the late Elites.
If the big end bearing was worn, it`ll still run :-X
It would still run if there were no piston or rod in that cylinder ;D ;D
Its a non runner for another reason..... go on someone ask him ;D ;D
Yep , 5 pot will be ok for a few hundred miles . Just stuff some rag in the hole ;D ;D
Ran mine on 3 cylinders , still got me home :P
-
Ok what else is wrong?? ???
For £150 who cares,get ya money back on bits.
Only problems are to far away and its not an estate.
-
It won't stay £150, 6 days to go
-
And we have no idea what the reserve is ;)
-
And we have no idea what the reserve is ;)
Well its not £150 :'(
-
And we have no idea what the reserve is ;)
No reserve. Buy It Now for £300.00