Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Kieran on 25 August 2015, 12:16:22

Title: Malfunction indicator
Post by: Kieran on 25 August 2015, 12:16:22

Hello everyone

On towing the caravan home the other day the warning light came on. Car is running fine apart from the spanner light illuminated. Took the car for a drive yesterday and although the light went off it soon came back on again. Did the pedal test and code 0650 came up indicating Malfunction Indicator Control Circut/High/Low/Open.
What does this mean and how do you rectify it.

Thanks for looking. Car is 2.6 CDX Estate.
Kieran

Title: Re: Malfunction indicator
Post by: TheBoy on 25 August 2015, 18:54:52

What other codes?

Title: Re: Malfunction indicator
Post by: Kieran on 25 August 2015, 19:56:41

Just checked. Didn't think of looking for other codes. 0325 has also come up indicating Knock sensor 1circut low.

Title: Re: Malfunction indicator
Post by: Kieran on 25 August 2015, 20:02:18

Crank sensor was recently changed a couple of months ago using genuine parts. Could this cause a faultly signal. Car seems to be running fine with no noticeable problems.

Title: Re: Malfunction indicator
Post by: Kieran on 26 August 2015, 21:12:52

Anyone know what the problem could be. :y

Title: Re: Malfunction indicator
Post by: TheBoy on 27 August 2015, 19:03:37

Quote from: Kieran on 25 August 2015, 19:56:41

Just checked. Didn't think of looking for other codes. 0325 has also come up indicating Knock sensor 1circut low.

That's the fault then.  Although always worth clearing the codes, and see what comes back, if possible.