Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: Steve B on 25 August 2015, 21:25:50
		
			
			- 
				420  :'(
So is there anyone on here with a welder to move them cos im sure that 430 wont be far behind
			 
			
			- 
				Drive it harder... Mine only come up when driven like Miss Daisy for a period ::)
			
 
			
			- 
				
420  :'(
So is there anyone on here with a welder to move them cos im sure that 430 wont be far behind
Yeah but im not good enough yet  ::)
Serek will do it  :)
			 
			
			- 
				Try your luck at a local tyre/exhaust place.  I got Infinity Exhausts (Bristol) to do mine.  They charged me £30 cash, and that included two new bosses.  I bought two lambda sensors from a member on here for pence and bobs your fanny.
After advice, I left the original lambda's in place and popped the connectors up above the heatshield (cable-tie).
			 
			
			- 
				Give me until after Newent and then pop up and I will do it for you  :y
			
 
			
			- 
				
Give me until after Newent and then pop up and I will do it for you  :y
That sounds good to me mark. Do i need to get bosses/Blanking plates/or even replacement sensors  :-\
			 
			
			- 
				Bosses and plugs required....hopefully the sensors will come out (they usually do)
			
 
			
			- 
				
Bosses and plugs required....hopefully the sensors will come out (they usually do)
Meaning something like this  :-\
http://www.ebay.co.uk/itm/UNIVERSAL-EXHAUST-WELD-IN-ON-O2-OXYGEN-LAMBDA-SENSOR-BOSS-PLUG-M18-X1-5-18MM-/361032408895?hash=item540f355f3f
			 
			
			- 
				Yes, probably worth TB or Mr Wood commenting as they bought some for their motors and may be able to give more specific details.
			
 
			
			- 
				Put proper fuel in two days ago and not tesco stuff.. Light out today.  ;D